ADVANCE CHEMICAL ENTERPRISES -- ALL PURPOSE CLEANER  -- 7930-00N026987
<pre>=====================  Product Identification  =====================

Product ID:ALL PURPOSE CLEANER
MSDS Date:12/18/1991
FSC:7930
NIIN:00N026987
=== Responsible Party ===
Company Name:ADVANCE CHEMICAL ENTERPRISES
Box:1273
City:PONTE VEDRA
State:FL
ZIP:32082
Country:US
Info Phone Num:904-247-1707
Emergency Phone Num:904-247-1707
CAGE:ADVAN
=== Contractor Identification ===
Company Name:ADVANCE CHEMICAL ENTERPRISES
Box:1273
City:PONTE VEDRA
State:FL
ZIP:32082
Country:US
Phone:904-247-1707
CAGE:ADVAN

=============  Composition/Information on Ingredients  =============

Ingred Name:SILICIC ACID (H2SI03), DISODIUM SALT; (SODIUM METASILICATE
    (DRY BASIS))
CAS:6834-92-0
RTECS #:VV9275000
Fraction by Wt: 5%

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:CONTACT WITH CONCENTRATED MATERIAL MAY PRODUCE
    SKIN IRRITATION OR DERMATITIS. EYE CONTACT RESULTS IN EXTREME
    IRRITATION, AND MAY PRODUCE PERMANENT DAMAGE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYE: IMMEDIATELY WASH WITH LARGE AMOUNTS OF WATER FOR AT
    LEAST 15 MINUTES. CALL MD. SKIN: WASH AFFECTED AREA WITH WATER FOR
    15 MINUTES. CALL MD IF IRRITATION PERSISTS. INGEST: CALL MD
    IMMEDIATELY (FP  N). INHAL: REMOVE TO FRESH AIR. SUPPORTBREATHING
    (GIVE O2/ARTF RESP) .

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:DIKE LARGE SPILLS TO PREVENT SPREAD OF LIQUID,
    THEN MOP UP OR ABSORB LIQUID WITH VERMICULITE OR OTHER APPROVED
    ABSORBENT. SMALL SPILLS MAY BE MOPPED UP, WASHED AWAY WITH A LARGE
    EXCESS OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
    KEEP OUT OF REACH OF CHILDREN.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:NOT REQUIRED.
Protective Gloves:RUBBER GLOVES RECOMMENDED FOR CONC.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:SAME/WATER
Vapor Density:SAME/WATER
Spec Gravity:1.06
Evaporation Rate &amp; Reference:SAME AS WATER
Solubility in Water:COMPLETELY SOLUBLE
Appearance and Odor:GREEN LIQUID WITH A MILD SURFACTANT ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF ABSORBED MATERIAL BY INCINERATION OR
    BURYING IN A APPROVED LANDFILL IN ACCORDANCE WITH LOCAL, STATE AND
    FEDERAL REGULATIONS. RESIDUES MAY BE WASHED AWAY WITH AN EXCESS OF
    WATER (SURFACTANTS	USED IS COMPLETELY BIODEGRADABLE).

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.