QUIKRETE CO -- CONCRETE BONDING ADHESIVE, 9902  -- 5610-00N025561
<pre>=====================  Product Identification  =====================

Product ID:CONCRETE BONDING ADHESIVE, 9902
MSDS Date:01/01/1988
FSC:5610
NIIN:00N025561
=== Responsible Party ===
Company Name:QUIKRETE CO
Address:1790 CENTURY CIRCLE
City:ATLANTA
State:GA
ZIP:30345
Country:US
Info Phone Num:404-634-9100
Emergency Phone Num:404-634-9100
CAGE:QUIKR
=== Contractor Identification ===
Company Name:QUIKRETE CO
Address:1790 CENTURY CIRCLE
City:ATLANTA
State:GA
ZIP:30345-5000
Country:US
Phone:404-634-9100
CAGE:QUIKR

=============  Composition/Information on Ingredients  =============

Ingred Name:ACETIC ACID, VINYL ESTER, POLYMER; (VINYL ACETATE
    HOMOPOLYMER)
CAS:9003-20-7
RTECS #:AK0920000

Ingred Name:FORMALDEHYDE  (SARA III)
CAS:50-00-0
RTECS #:LP8925000
Fraction by Wt: <0.5%
OSHA PEL:SEE 1910.1048
ACGIH TLV:C 0.3 PPM; A2; 9293
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Ingred Name:ACETIC ACID, VINYL ESTER; (VINYL ACETATE)
CAS:108-05-4
RTECS #:AK0875000
OSHA PEL:10 PPM/15 STEL
ACGIH TLV:10 PPM/15,A3 STEL;93
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000

Ingred Name:WASTE DISP METH:DISPOSE OF SOLIDS IN LANDFILL. EMULSIONS
    CAN BE INCINERATED DIRECTLY UNDER APPROP CNDNTS. ALL (ING 6)
RTECS #:9999999ZZ

Ingred Name:ING 5: FEDERAL, ST & LOCAL REGS REGARDING HLTH & POLLUTION
    SHOULD BE FOLLOWED WHEN DISPOSING OF CONTAM WATER/ (ING 7)
RTECS #:9999999ZZ

Ingred Name:ING 6: RECOVERED MATERIAL.
RTECS #:9999999ZZ

Ingred Name:SUPP DATA: SHOWN FORMALDEHYDE TO CAUSE CANCER IN LAB
    ANIMALS.FORMALDEHYDE IS READILY DETECTED DUE TO ITS IRRITANT(ING 9)
RTECS #:9999999ZZ

Ingred Name:ING 8:PROPERTIES.THE ODOR DETECTION LEV VARIES AMONG
    DIFFERENT INDIV BETWEEN 0.2 TO 1 PPM. IN ADDTN, ACCLIMATION(ING 10)
RTECS #:9999999ZZ

Ingred Name:ING 9:WILL OCCUR FROM RPTD EXPOS BUT SENSITIVITY RETURNS
    FOLLOWING REST PERIODS AWAY FROM THE ATMOSPHERE CONTAIN(ING 11)
RTECS #:9999999ZZ

Ingred Name:ING 10:FORMALDEHYDE. WHETHER RISK EXISTS AT LEVS <ODOR
    THRESHOLD HAS NOT BEEN DETERMINED.THERE ARE NO SYM OF INGEST.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:YES    IARC:YES	  OSHA:YES
Health Hazards Acute and Chronic:THE PRINCIPAL VOLATILE COMPONENT IS
    WATER. MINOR VOLATILE COMPONENTS ARE FORMALDEHYDE & VINYL ACETATE.
    BOTH MINOR COMPONENTS WILL MIGRATE FROM EMULSION & ESTABLISH AN
    EQUILIBRIUM CNDTN BETWEEN HEADSPA CE IN THE STORAGE CNTNR & LIQ
    EMULSION.LEVS IN EXCESS OF TLV'S (2PPM FOR FORMALDEHYDE, 10PPM FOR
    VINYL(EFTS OF OVEREXP)
Explanation of Carcinogenicity:FORMALDEHYDE: GROUP 2A (IARC); GROUP 2
    (NTP); OSHA REGULATED.
Effects of Overexposure:HLTH HAZ: ACETATE) CAN ACCUMULATE IN NON-VENTED
    HEADSPACES ABOVE STORED EMULSION. CARE MUST BE EXERCISED TO VENT
    HEADSPACE OF STORAGE TANKS W/HUMIDIFIED AIR. DRUMS SHOULD BE OPENED
    IN WELL VENT SPACE. FORMALDEHYDE CONC IN THE WORK PLACE MAYEXCEED
    TLV UNDER SOME CNDNTS OF USE. ALTHOUGH FORMALDEHYDE IS A MINOR(SUPP
    DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:SKIN: WASH WITH SOAP AND WATER. EYE: IF SPLASHED IN EYE,
    FLUSH WITH COPIOUS QUANTITIES OF WATER FOR AT LEAST 15 MINUTES AND
    SEEK MEDICAL ADVICE. INGEST: INGEST AMTS ARE NOT ANTICIPATED TO
    PRODUCE ADVE RSE HLTH EFTS, BUT SHOULD BE REMOVED FROM STOMACH BY
    INDUCED VOMIT/ASPIR. CALL MD. INHAL: REMOVE TO FRESH AIR. SUPPORT
    BREATHING (GIVE O*2/ARTF RESP) .

=====================  Fire Fighting Measures  =====================

Extinguishing Media:FOR DRY POLYMER, USE WATER OR CO*2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
    .WHEN POLYMER BURNS, WATER, CO*2, CO & SMOKE ARE PRODUCED.
    PYROLYSIS PRODS MAY INCL SUCH MATL (SUPP DATA)
Unusual Fire/Explosion Hazard:THERE ARE NO UNUSUAL FIRE OR EXPLOSION
    HAZARDS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:IF MATL IS RELS/SPILL, DAM UP TO LIM
    SPREAD.MOP UP/ABSORB ON INERT MATL & PLACE IN CNTNRS.IF SPILL
    OCCURS IN ENCLSD AREA, VENT.POLYMER MAY BE SEPARATED FROM WATER BY
    ADDTN OF ALUM & FERRIC CHLORIDE.FO R FURTHER SPILL PROC REFER TO
    ORIGINAL MSDS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL PLACE, AVOID FREEZING.
    MINIMIZE CONT W/AIR TO PVNT INNOCULATION W/MICROORGANISMS WHICH CAN
    CAUSE DECOMP & MOLDY OVERGROWTH.
Other Precautions:THE PROD WILL IMPART A WHITE MILKY COLOR TO WATER.
    WHEN WATER IS AGITATED/IS TURBULENT, FOAMING CAN RESULT. AS
    SUPPLIED/DILUTED, PROD MATL (FOAM INCL) WHEN SPLASHED ON AUTOS OR
    OTHER PERSONAL PROPERTY  IS DIFFICULT TO REMOVE IF ALLOWED DRY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:IF HEADSPACE VENT IS REQUIRED, USE HUMIDIFIED AIR TO REDUCE
    SKIN FORMATION ON THE EMULSION SURFACE.
Protective Gloves:RUBBER PROTECTIVE GLOVES ARE REQUIRED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NORMAL CLEANLINESS SHOULD BE OBSERVED.
Supplemental Safety and Health
FIRE FIGHT PROC:AS ACETIC ACID, ACROLEIN/ACETALDEHYDE. MASKS TO REMOVE
    SMOKE & ORG VAP FROM RESP AIR ARE RECOMMENDED FOR USE WHEN FIGHTING
    FIRES INVOLVING VINYL ACETATE POLYMERS & COPOLYMERS. EFTS OF 
    OVEREXP:VOLATILE COMPONENT OF THESE EMULSION PRODS, IT IS IMPORTANT
    TO RECOGNIZE THAT RECENT TEST RESULTS HAVE (ING 8)

==================  Physical/Chemical Properties  ==================

HCC:T6
Solubility in Water:WATER MISCIBLE
Appearance and Odor:WHITE, MOBILE LIQUID, WITH A PLEASANT, SWEET ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
SULFURIC ACID OR ALKALI MATERIALS SUCH AS SODIUM OR METAL HYDRIDES.
Stability Condition to Avoid:COAGULATION MAY OCCUR FOLLOWING FREEZING,
    THAWING OR BOILING.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:FOR SM SPILLS (PROBABLY LESS THAN 100 GALLONS),
    DILUTE W/WATER. WASH INTO INDUSTRIAL SEWER. (WARNING, CONSULT LOCAL
    SEWER AUTHORITY BEFORE DISCHARGING). FOR LRG QTYS, PLACE IN
    SETTLING POND & ADD FERR IC CHLORIDE & LIME. DECANT WATER. (ING 5)

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.